English
Leave Your Message
Professional Supply Feces Separator/poultry Manure Solid-liquid Separator

Sludge Dewatering

Professional Supply Feces Separator/poultry Manure Solid-liquid Separator

The solid-liquid separator is a dehydration machine for livestock and poultry manure, medicinal residues and distiller's grains. It can separate pig manure, duck manure, cow manure, chicken manure and other livestock and poultry manure into liquid organic fertilizer and solid organic fertilizer.

    description2

    working principle of feces separator

    The principle of solid-liquid separator is spiral extrusion solid-liquid separation technology.The main components are: body, screen, extrusion and stranding, reduction motor, unloading device and other components.
    After the cutting feed pump pumps the mixture to the solid-liquid separator through the pipeline, the separator starts, and the mixture is gradually pushed forward to the front of the body by squeezing the stringer.
    At the same time, the pressure of the leading edge is constantlyincreased, forcing the water in the material to extrude the screen and flow out of the drain pipe.The work of the extruder is continuous, the material is continuously pumped into the body, the leading edge of the pressure is increasing, when to a certain extent, the discharge port will be opened, extrusion extrusion port, to achieve the purpose of extrusion.In order to grasp the speed and water content of the discharge, the control device in front of the main engine can be adjusted to achieve a satisfactory and appropriate discharge state.

    description2

    Features of feces separator

    1.With 304stainless steel cover,which is easy to take off and observe.
    2.Screw and screen adopt high quality 304SUS,Which is preservative,can use long time.
    3.Easy operate,small dimension,low noise,work stable.
    4.Low moisture content after press,you can’t press out water by hand.After press the moisture content is around 60%,of course it is not water weight 60%.
    5.Screw is full welding,which is more durable.
    6. Spiral extruded solid-liquid separator is small in size, low in speed, simple in operation, convenient in installation and maintenance, low in cost, high in efficiency, quick in investment recovery, no need to add any flocculant.
    7. High level of automation, easy maintenance, large daily handling capacity, small footprint, completely closed, environmental protection and sanitation, low power consumption, suitable for continuous operation.Its key components are made of stainless steel, the machine weighs nearly half a ton and has a small size.
    8. Excellent dewatering effect of pulp in paper mill and distillery, low moisture content of discharge.
    9. The separated solid part is dry and free of odor, which is a good fertilizer for farmland. No leachate is generated during storage, and it is convenient for transportation and storage.After separation, the moisture content of the liquid part is about 60%, which is not easy to form crusting and precipitation in the storage process.
    The liquid nitrogen and phosphorus after separation are less, which can be diluted asirrigation water or water fertilizer, and can be effectively absorbed by farmland crops.
    productsproducts1

    description2

    Application scenarios

    This machine uses a pump to suck various fresh materials such as animal waste, industrial waste, juice waste, oil waste, etc. into the dehydration equipment. After the materials pass through the special screen, they are squeezed by spirals and rotations. The speed of the machine can reach 45r/min. Under the pressure of the screen and high speed, the material is dehydrated by the machine, and the water enters the pool through the screen. After being processed by this machine, the moisture content of the material is less than 30%, and it can be easily bagged and shipped, or used directly.
    show1z1ishow2khb